Maryland Metrics PTFE - saturflon glass

Saturflon glass

Dimensions

Types AP and GP have a surface treated with silicone adhesive (thickness 0,07 mm ca.) protected by a sheet of paper, which allows it to be used at temperatures of up to about 200°C. The thiknesses, weights, PTFE contents and tensile strengths refer to the corresponding non-treated types.

(1) Nominal breaking strenght of fabric warp ASTM D 902

Type	Thickness (mm)	Weight (g/m2)	T.strength (N/mm)(*)	PTFE content (%)
A076 A127 A152 A254	0,075 0,125 0,150 0,250	145 250 300 490	10 20 20 40	66 58 66 58
B076 B127 B254 B355 B560	0,075 0,125 0,350 0,350 0,550	105 200 380 500 780	10 20 42 60 80	56 48 50 50 48
AP076 AP127 AP152 AP254	0,075 0,125 0,150 0,250	146 250 300 510	10 20 20 40	66 58 66 58
BP076 BP127 BP254	0,075 0,125 0,350	105 200 380	10 20 42	56 48 50
G127 G254	0,125 0,254	250 510	20 40	58 58
GP127 GP254	0,125 0,250	250 510	20 40	58 58

Tolerances

Width

Standard: 1000 mm (approx).
Minimum: 12,5 / 300 mm, on request.

Length

Standard rolls of 30 m including a maximum of 3 lengths, the shortest being of 8 m.

[ O-ring index page ] [ Contents ] [ Contact us ] [ Copyright ] [ Products ] [ Customer Service ] [ Group ]