BRM series rod ends are available from Maryland Metrics

The BRM series rod ends are double row, angular contact ball bearings. This design is especially suitable for high speeds, large swiveling angles or rotating movements with relatively low or medium loads. Prominent technical features are the low bearing friction, extended times for re-grease maintenance, as well as the sealing against rough dirt penetration by means of shields on both sides. A special heat treatment procedure enhances the rod end housing raceway hardness, ensuring at the some time high stability with changing loads. They are designed for low load, high speed applications.

METRIC

Left hand rod end part numbers end in -502

PART #	D1	D3	D6	B1	H	L	Dynamic load in newtons	Static load in newtons
BRM 06-00-501	6	M6 X 1.0	20	9	36	22	2750	650
BRM 08-00-501	8	M8 X 1.25	24	12	42	25	4000	1000
BRM 10-00-501	10	M10 X 1.5	28	14	48	29	4450	1450
BRM 12-00-501	12	M12 X 1.75	32	16	54	33	4950	1800
BRM 14-00-501	14	M14 X 2.0	36	19	60	36	5600	2000
BRM 16-00-501	16	M16 X 2.0	42	21	66	40	6250	2350
BRM 18-00-501	18	M18 X 1.5	46	23	72	44	7100	2900
BRM 20-00-501	20	M20 X 1.5	50	25	78	47	7900	3450
BRM 22-00-501	22	M22 X 1.5	54	28	84	51	9300	3980
BRM 25-00-501	25	M24 X 2.0	64	31	94	57	11030	5680
BRM 30-00-501	30	M30 X 2.0	70	37	110	66	14150	7450

BRM FRACTIONAL BALL BEARING ROD ENDS

Left hand rod end part numbers end in -502

PART #	D1	D3	D6	B1	H	L	Dynamic load in newtons	Static load in newtons
BRM 3/8-00-501	.375	.3750-24 UNF	1 7/16	9/16	1 57/64	1 5/32	4360	1425
BRM 1/2-00-501	.500	.5000-20 UNF	1 5/16	5/8	2 29/64	1 1/2	4850	1850
BRM 5/8-00-501	.625	.6250-18 UNF	1 21/32	53/64	2 39/64	1 37/64	6250	2350
BRM 3/4-00-501	.750	.7500-16 UNF	1 31/32	63/64	3 5/64	1 55/64	7750	3380
BRM 1/1-00-501	1.000	1.0000-12 UNF	2 17/32	1 7/32	3 23/32	2 1/4	11030	5680
BRM 1/1-01-501	1.000	1.0000-14 UNS	2 17/32	1 7/32	3 23/32	2 1/4	11030	5680