| Tolerances |
Inner Ring Bores
Series K Rod Ends and Spherical Plain Bearings are bored to H7
tolerances.
We recommend g6 fit for the shaft.
For the bore tolerances of series E Rod Ends and Spherical Plain Bearings, the
following table applies. We recommend g7 fit for the shaft.
| Bore Ø 5-18mm |
0/- 8μ |
| Bore Ø 20-30mm |
0/- 8μ |
| Bore Ø 35-50mm |
0/- 8μ |
| Bore Ø 60-80mm |
0/- 8μ |
Spherical Plain Bearings -
Outside Diameter
Outside Diameter for Spherical Plain
Bearings series K are manufactured to h6 tolerances.
For machining the housing we recommend J7 tolerance.
Outside Diameter for Spherical Plain Bearings series E are manufactured to h5
tolerances.
For machining the housing we recommend JS7 tolerance.
Threads
To standard metric ISO threads DIN 13, tolerance 6h.
Maximum Pivoting Angle
depends on the series and size and
varies between 6 and 15 degrees.
Rod Ends and Spherical Plain Bearings
Series K:
| Size | Maximum Angle |
| 2-12 | 13o |
| 14-40 | 15o |
Rod Ends and Spherical Plain Bearings Series E:
| Size | Maximum Angle |
| 6-10 | 12o |
| 12-20 | 8o |
| 25-80 | 6o |