| Rod Ends Series E - steel on steel with lubrication fittings |
| Series
EA Rod Ends with male thread made from free-cutting or heat-treated steel, zinc plated, steel on steel Spherical Plain Bearings with lubrication fittings. |
 |
| Size (D) |
B | M | A | F | L | O | G | GL | Static load Co kN |
Dynamic load C kN |
Weight gram |
Weight lb. |
| 6 | 6 | 4,4 | 20 | 36 | 46,0 | 8,0 | M 6 | 18 | 8,2 | 3,4 | 16 | 0,03528 |
| 8 | 8 | 6,0 | 24 | 42 | 54,0 | 10,2 | M 8 | 22 | 12,9 | 5,5 | 28 | 0,06174 |
| 10 | 9 | 7,0 | 28 | 48 | 62,0 | 13,2 | M 10 | 26 | 17,6 | 8,1 | 50 | 0,11025 |
| 12 | 10 | 8,0 | 34 | 54 | 71,0 | 14,9 | M 12 | 28 | 24,5 | 10,8 | 86 | 0,18963 |
| 15 | 12 | 10,0 | 40 | 63 | 83,0 | 18,4 | M 14 | 34 | 36,0 | 17,0 | 140 | 0,3087 |
| 17 | 14 | 11,0 | 46 | 69 | 92,0 | 20,7 | M 16 | 36 | 45,0 | 21,2 | 190 | 0,41895 |
| 20 | 16 | 13,0 | 53 | 78 | 104,5 | 24,2 | M 20x1,5 | 43 | 60,0 | 30,0 | 320 | 0,7056 |
| 25 | 20 | 17,0 | 64 | 94 | 126,0 | 29,3 | M 24x2 | 53 | 83,0 | 48,0 | 560 | 1,2348 |
| 30 | 22 | 19,0 | 73 | 110 | 146,5 | 34,2 | M 30x2 | 65 | 110,0 | 62,0 | 890 | 1,96245 |
| 35 | 25 | 21,0 | 82 | 140 | 181,0 | 39,8 | M 36x3 | 82 | 146,0 | 80,0 | 1400 | 3,087 |
| 40 | 28 | 23,0 | 92 | 150 | 196,0 | 45,0 | M 39x3 | 86 | 180,0 | 100,0 | 1800 | 3,969 |
| 45 | 32 | 27,0 | 102 | 163 | 214,0 | 50,8 | M 42x3 | 94 | 240,0 | 127,0 | 2610 | 5,75505 |
| 50 | 35 | 30,0 | 112 | 185 | 241,0 | 56,0 | M 45x3 | 107 | 290,0 | 156,0 | 3450 | 7,60725 |
| 60 | 44 | 38,0 | 135 | 210 | 277,5 | 66,8 | M 52x3 | 115 | 450,0 | 245,0 | 5900 | 13,0095 |
| 70 | 49 | 42,0 | 160 | 235 | 315,0 | 77,9 | M 56x4 | 125 | 585,0 | 315,0 | 8200 | 18,081 |
| 80 | 55 | 47,0 | 180 | 270 | 360,0 | 89,4 | M 64x4 | 140 | 710,0 | 400,0 | 12000 | 26,46 |
Materials:
| Housing: | up to size 10 turned, from free-cutting steel to 9SMnPb28K, |
| from size 12 forged from heat-treated steel to C45 | |
| Bearing: | steel on steel bearing GE..E, requiring lubrication, |
| from size 20 available sealed from both sides (-2RS) | |
| Lubrication: | up to size 17 regreasing not possible, |
| from size 20 fitted with hydraulic nipples to DIN 71412 |