| Hydraulic Rod Ends - Weld-On Base |
| Series
FS..C Rod Ends series E to DIN ISO 12240-4, type S with circular surface for weld-on. Spherical Plain Bearings, regreasable, fixed through caulking on both sides
|
 |
| Size (D) |
B | M | A | F | L | L1 | K | J | Static Load Co kN |
Dynamic Load C kN |
Pivoting angle α |
Weight g |
| 10 | 9 | 7 | 29 | 24 | 38,5 | 2,0 | 15,0 | 3 | 15,6 | 8,1 | 12 | 40 |
| 12 | 10 | 8 | 34 | 27 | 44,0 | 2,0 | 17,5 | 3 | 21,6 | 10,8 | 11 | 65 |
| 15 | 12 | 10 | 40 | 31 | 51,0 | 2,5 | 21,0 | 4 | 32,0 | 17,0 | 8 | 120 |
| 17 | 14 | 11 | 46 | 35 | 58,0 | 3,0 | 24,0 | 4 | 40,0 | 21,2 | 10 | 180 |
| 20 | 16 | 13 | 53 | 38 | 64,5 | 3,0 | 27,5 | 4 | 54,0 | 30,0 | 9 | 250 |
| 25 | 20 | 17 | 64 | 45 | 77,0 | 4,0 | 33,5 | 4 | 72,0 | 48,0 | 7 | 450 |
| 30 | 22 | 19 | 73 | 51 | 87,5 | 4,0 | 40,0 | 4 | 95,0 | 62,0 | 6 | 675 |
| 35 | 25 | 21 | 82 | 61 | 102,0 | 4,0 | 47,0 | 4 | 125,0 | 80,0 | 6 | 950 |
| 40 | 28 | 23 | 92 | 69 | 115,0 | 5,0 | 52,0 | 4 | 156,0 | 100,0 | 7 | 1400 |
| 45 | 32 | 27 | 102 | 77 | 128,0 | 5,0 | 58,0 | 6 | 208,0 | 127,0 | 7 | 1910 |
| 50 | 35 | 30 | 112 | 88 | 144,0 | 6,0 | 62,0 | 6 | 250,0 | 156,0 | 6 | 2650 |
| 60 | 44 | 38 | 135 | 100 | 167,5 | 8,0 | 70,0 | 6 | 390,0 | 245,0 | 6 | 4600 |
| 70 | 49 | 42 | 160 | 115 | 195,0 | 10,0 | 80,0 | 6 | 510,0 | 315,0 | 6 | 7000 |
| 80 | 55 | 47 | 180 | 141 | 231,0 | 10,0 | 95,0 | 6 | 620,0 | 400,0 | 6 | 10800 |
Materials:
| Housing: | St 52-3, forged |
| Bearing: | Steel on steel bearing GE.. E, requiring lubrication |
| available with bearing GE..FO or GE..LO | |
| Greasing: | up to size 12 not regreasable |
| from size 16 – 20 fitted with grease hole in housing | |
| from size 25 fitted with hydraulic grease nipples to DIN 71412 |